| Customization: | Available |
|---|---|
| Type: | Clay Dry Sand |
| Casting Method: | Directional Crystallization |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Equipment features:
1. The machine effectively uses the surplus steam in the dewaxing kettle. After decompression treatment, the steam temperature is reduced to the appropriate dewatering temperature of the wax and water mixture.
2. After the dewaxing operation, the wax water mixture is separated by the cyclone, the water is automatically released, and the heat exchange of the umbrella film is rapid, and the rapid evaporation of the water in the wax water mixture is finally completed. According to 1.5 tons/set /8h, it can fully match the synchronous operation of dewaxing kettle, and can replace at least 4 traditional water buckets, and the optimization effect is obvious
We also provide common Type for your reference:
| Cylinder free wax press instructions | Unit | HMS-8 |
|---|---|---|
| Closing pressure | T | 8 |
| Closing stroke | mm | 380 |
| Maximum space | mm | 400 |
| Minimum space | mm | 20 |
| Inside column dimension | mm | 400 |
| Platen width | mm | 260 |
| Platen depth | mm | 360 |
| Nozzle height adjustment | mm | 150 |
| Nozzle retraction adjustment | mm | 100 |
| Nozzle left and right adjustment | mm | 900 |
| Table height | mm | 970 |
| Mechanical dimensions | mm | 2200×1470×2000 |
| Wax storage tank capacity | L | 80 |
| Shot quantity | L | 1.8 |
| Injection pressure | Kg/cm² | 10-100 |
| Exit time | S | 99.9 |
| Nozzle aperture | mm | 6 |
| Hydraulic oil pump | Kg/cm² | 20×140 |
| Volumetric tank | L | 120 |
| Power supply specification | 50Hz | 220/380×3P |
| Heater power | KW | 5 |
| Mechanical weight | Kg | 1850 |
| Nozzle up and down | Cylinder up and down |
Shandong Runhai Machinery Technology Co., Ltd. registered capital of 10 million, the existing staff of 25 people, technical personnel 6 people, the factory covers an area of 3200 square meters, the annual production capacity of 50 million yuan, located in Weifang City, Shandong Province, the products involved in steel and metallurgy, aerospace, military medical, automotive and other fields.
1.Are you factory?
Yes, We are factory.
Shandong Runhai Machinery Technology Co., Ltd. registered capital of 10 million, the existing staff of 25 people, technical personnel 6 people, the factory covers an area of 3200 square meters, the annual production capacity of 50 million yuan, located in Weifang City, Shandong Province, the products involved in steel and metallurgy, aerospace, military medical, automotive and other fields.
1. Can I ask for special design?
Of course,We offer customized services.
2. How about installation and commission overseas?
We can provide remote guidance and overseas services. If you need me arrange engineers to go to your factory to debug equipment,you just need to extra pay the engineer's Travel expenses
3.what can you buy from us?
Electric furnace, Molding equipment,Shell making equipment,Wax processing equipment,Roasting and casting equipment,Post-processing equipment or other equipment.
4. How long is the delivery time?
It usually takes 30 days, depending on the quantity
5. What is the terms of payment?
We support T/T and L/C payment terms. you need pay by T/T advance 30% as deposit within 7 working days after signing contract and pay the balance 70% before delivery
){kind=link}