Casting Mold Shell Roster Electric Heating Furnace

• Customization: Available
• Certification: CE, ISO
• Place Style: Horizontal
• Model NO.: RQ3-2-12
• Range of Applications: Industrial
• Type: Electric Holding Furnace
• Usage: Steel Molding
• Fuel: Gas
• Product Name: Box Type Roaster
• Delivery Time: 45 Days
• Transport Package: Waterproof Tarpaulin Package
• Specification: Customized
• Trademark: Runhigh
• Origin: China
• HS Code: 85141990
• Production Capacity: 20000pieces/Year
• Package Size: 300.00cm * 200.00cm * 200.00cm
• Package Gross Weight: 3000.000kg

Product Description

Product Description

Casting Mold Shell Roster Electric Heating Furnace

Equipment overview and features:
1. Equipment model: RQ3-2.6-12
2, equipment use: This system is mainly used for precision casting mold shell roasting
3, equipment composition: the equipment is mainly composed of steel structure frame of the furnace body, high temperature refractory brick furnace, (all fiber insulation material), furnace door, high temperature bearing stove, heat storage burner, fuel burner, control system.
4, equipment features:

Regenerative shell baking furnace is an efficient organic waste gas treatment equipment, its working principle is to heat the organic waste gas to more than 760 degrees Celsius, so that the volatile organic compounds (VOCs) in the waste gas oxidation decomposition into carbon dioxide and water. The heat generated by the oxidation process is stored in a special ceramic accumulator, which heats up the accumulator and "accumulates heat". The heat stored in the ceramic heat accumulator is used to preheat the organic waste gas entering later, which is the "heat release" process of the ceramic heat accumulator, thus saving the fuel consumption of the exhaust gas heating process.

1, energy saving: the equipment shell is welded by high-quality channel steel and high-quality hot rolled steel plate, the furnace is composed of three layers of heat-resistant material, effective thickness ≥600mm, to minimize heat loss.
The special regenerative burner is used to make full use of waste heat, the furnace temperature uniformity is less than 5ºC, the smoke exhaust temperature is less than 100ºC, and the combustion efficiency is ≥95%, so as to achieve the energy saving requirements to the maximum extent.
2, environmental protection: combustion chamber poor itching combustion, oxidation burn loss is less than 1%, and reduce greenhouse gas emissions, NOx emissions less than 100ppm, and low noise.
3, high efficiency: compared with the traditional box-type baking furnace, can save more than 50% of energy, high temperature faster, shorten the roasting time.
4, safety: the equipment is equipped with automatic control system, with automatic ignition, flameout protection, tempering protection, simple operation, high safety. Not only has the voltage regulation, but also the safe release function, absolutely eliminate the backfire phenomenon.

Technical parameter
 

Product name	Burning Shell Mold Roasting Furnace Industry Furnace (Double Door) in Hot Sales
Model	RQ3-2-12	RQ3-3-12
Power	3X380V 50HZ	3X380V 50HZ
Power (KW)	8.5	8.5
Smoke exhaust temperature (mm)	≤100ºC	≤100ºC
Thickness of furnace guard plate (mm)	≥ 4 (fixed with channel steel inside)	≥ 4 (fixed with channel steel inside)
Thickness of furnace surface protection plate (mm)	≥6	≥6
refractory bricks	National standard products (furnace doors made of specially made high aluminum bricks)	National standard products (furnace doors made of specially made high aluminum bricks)
Ignition method	High voltage pulse (automatic)	High voltage pulse (automatic)
Fuel	Natural gas	Natural gas
Furnace door lifting motor	1.5KW	1.5KW
Combustion fan	3.0KW	3.0KW
Smoke exhaust fan	4.0KW	4.0KW
Combustion fan air volume	Frequency converter adjustment	Frequency converter adjustment
Smoke exhaust fan air volume	Frequency converter adjustment	Frequency converter adjustment
Wind and natural gas (ignition process)	Quantitative control	Quantitative control
Furnace nozzle gas inlet pressure (Kap)	7~8	7~8
Hourly flow rate of gas pipeline	35-40 cubic meters	35-40 cubic meters
Natural gas pipeline	External pipeline DN50 or above, pressure between 10 and 12Kpa, cannot exceed 30KPa, equipment uses pipeline DN40	External pipeline DN50 or above, pressure between 10 and 12Kpa, cannot exceed 30KPa, equipment uses pipeline DN40
Preheating air temperature	150~250ºC	150~250ºC
Gas consumption (continuous operation)	12-15, 14-16KG standard cubic meter/h	12-15, 14-16KG standard cubic meter/h
Design maximum temperature	1300ºC	1300ºC
Long term operating temperature	≤1200ºC	≤1200ºC
Thickness of furnace wall steel plate	4mm	4mm
Furnace door lifting method	Electric	Electric
Furnace door opening and closing mode	Manual	Manual
Average energy consumption for continuous operation at 1150 ºC (hours)	13-14 cubic meters/hour (continuous furnace operation for 10 hours)	13-14 cubic meters/hour (continuous furnace operation for 10 hours)

Can Be Customized
* Can be designed and manufactured for users of various sizes, different specifications of the box furnace

Brief introduction of equipment structure
1. Furnace frame structure:
Similar to the general mold shell baking furnace, the shell is welded by A3 steel plate and section steel, welded by high-quality section steel and Q235 steel plate, the structure is solid and reliable, all welds are uniform and smooth, no porosity, inclusion, non-fusion and other defects, the overall strength is good, not easy to deformation, smooth and smooth appearance.
2, Furnace lining: refractory insulation layer 600mm
The refractory temperature is 1250ºC, the insulation layer is made of high quality long fiber blanket as raw material, and is made of special equipment. There is a certain amount of compression left during the processing to ensure that each fiber expands in different directions after the completion of the module masonry, so that the modules are squeezed into the whole without a gap to achieve good heat storage effect. Moreover, the product is convenient to construct. Directly anchored on the cold side of the furnace shell, improve the heat resistance of the fiber, compared with other products, the advantages are thermal conductivity (0.13Kcal/mhºC), low heat capacity (1726KT/m), excellent corrosion resistance, excellent thermal stability and shock resistance, insulation.
3, Heating: side gas heating, bottom electric heating.
Regenerative burner is used for heating, and both sides are evenly distributed. Each burner is equipped with a control solenoid valve on the gas pipe, each burner is equipped with an independent and complete combustion controller, flame detection, fire extinguishing alarm automatically cut off gas. This fully ensures the stability and safety of the combustion temperature control system
4, Elevator door:
The shell is made of 6mm high-quality steel and Q235 steel plate welded frame, with enough heat resistance and high temperature thermal deformation resistance, reasonable design of expansion joints around the door frame, its structural form can avoid warping. The inner lining of the furnace door is pressed by folding block of high purity refractory fiber needled blanket.
The furnace door is electric elevator door, easy to operate.
5, High temperature bearing stove:
The mesa high aluminum brick, the frame brick is shaped high strength high aluminum brick, and under it is super lightweight high strength insulation brick. The collision-prone parts and load-bearing parts are constructed with heavy high-aluminum refractory bricks. Expansion joints are left along the hearth longitudinally and laterally to prevent the lining from being damaged by expansion after heat.
6. Control part:
The side is heated by two burners and placed diagonally, so that the temperature in the furnace is uniform, to ensure that the temperature in the furnace is uniform, the temperature is fast, the furnace temperature fluctuation is small, and the energy is saved.
The temperature control system is composed of PLC intelligent temperature control instrument and thermocouple. The device comes with an electrode type automatic ignition system and ionization monitoring system, making the operation simple and safe.

 

Packaging & Shipping

 

 

Company Profile

Shandong Runhai Machinery Technology Co., Ltd. registered capital of 10 million, the existing staff of 25 people, technical personnel 6 people, the factory covers an area of 3200 square meters, the annual production capacity of 50 million yuan, located in Weifang City, Shandong Province, the products involved in steel and metallurgy, aerospace, military medical, automotive and other fields.
 

The company's main products are: truck annealing furnace, forklift quenching furnace, tempering furnace, carburizing furnace, nitriding furnace, vacuum furnace, mold shell baking furnace, medium frequency furnace, precision casting equipment, sand casting equipment, shot blasting machine, cooling tower and other products.
The company always adheres to the purpose of quality first and customer first, and is willing to meet the needs of market competition and international economic globalization with high-quality products, reliable commitment and first-class service.
 

FAQ

 Q1. What is your after-sales service policy?  
A: We have a dedicated pre-sales and after-sales team that guarantees a response within 8 hours to resolve any technical issues.  

 Q2. What is the warranty period for your products?  
A: We provide a 12-month warranty, covering manufacturing defects. (Excludes damage from improper operation or normal wear of consumable parts.)  

 Q3. How do you ensure product quality?  
A: Our furnaces are CE-certified and undergo strict double-inspection before shipment to guarantee performance and safety.  

 Q4. What is your standard delivery time?  
A: Typical lead time is 45 days (custom designs may vary). We prioritize on-time delivery to keep your projects on schedule.  

 Q5. Are you a manufacturer or a trading company?  
A: We are a direct manufacturer with 10+ years of expertise in furnace production, ensuring full control over quality and customization.  

 

Certifications

W~ha~ts~Ap`p+853 
63~422~84~3